Datasheet

IGS-1020TF
3
IGS-1020TF
Intelligent Power Savings
Intelligent Power Savings
20m 40m 60m 80m 100m0m
Other Switch
20m 40m 60m 80m 100m0m
Power
Consumption
Power
Consumption
PC
PC
PC
PC
PC
PC
The shorter the distance is,
lesser power is consumed.
Same power consumption
Robust Protection
The IGS-1020TF provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity
toimproveproductstabilityandprotectsusers’networksfromdevastatingESDattacks,makingsuretheowofoperationdoesnotuctuate.
Plug and Power Network Deployment
All of the RJ45 copper interfaces in the IGS-1020TF support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5
or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or
crossover cables.
Energy Saving
The IGS-1020TF, incorporating advanced green networking technologies and and IEEE 802.3az protocol based power saving, is able to provide power
savingupto50%lessenergybutmaintainshighperformanceefciently.
• Link Down power saving
TheLinkDownpowersavinggoesbeyondIEEEspecicationstoautomaticallylowerpowerconsumptionforagivenportwhenitisnotlinked.WiththeLink
Down power saving technology, the IGS-1020TF will automatically adjust power usage of the ports that are shut down or not connected to network device.
• Intelligent power scale based on cable length
Intelligent power scale is an intelligent algorithm that actively determines the appropriate power level based on cable length. When the IGS-1020TF is
connected with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the IGS-1020TF would automatically detect the
Ethernetcablelengthanddiminishpowerusage.Theconnecteddevicecansubstantiallyreducetheoverallpowerconsumption,whichmakesasignicant
contribution to energy saving.