Datasheet

IGS-1020PTF Series
5
Perfect Integration Solution for IP PoE Camera and NVR System
The IGS-1020PTF series provides eight 10/100/1000BASE-T 802.3at PoE+ ports which can offer sufficient PoE power to 8 PoE IP cameras at the same
time. In addition, with the two 100/1000BASE-X SFP interfaces, the IGS-1020PTF series can connect to a core fiber switch and send video streams to an
NVRandmonitoringcenter.Throughthehigh-performanceswitcharchitecture,theIGS-1020PTFseriesfacilitatestherecordedvideolesfromthe8PoE+
IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via
Internet. The IGS-1020PTF series undoubtedly brings an ideal secure surveillance system at a lower total cost.
Outdoor
IP Camera
PoE
Fiber Optic Cable
up to 120km
Fiber Optic Cable
up to 120km
Ethernet up to
250 meters
Extending Ethernet Distance
Gigabit Fiber Switch
Network Video
Recorder
Outdoor
IP Camera
IGS-1020PTF-12V
240km
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
PoE
100BASE-TX UTP with PoE
PoE
IGS-1020PTF-12V
10001000
1000
Model
IGS-1020PTF IGS-1020PTF-12V
HardwareSpecications
Copper Ports 8 10/100/1000BASET RJ45 auto-MDI/MDI-X ports
PoE Injector Ports 8 ports with 802.3at PoE+ injector function (Ports 1 to 8)
SFP Slots
2 1000BASE-SX/LX/BX SFP interfaces (Ports 9 and 10)
Compatible with 100BASE-FX SFP
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
DIP Switch Standard/Extend mode (Extend mode for Ports 5 to 8 only)
LED Indicators
3 x LED for System and Power:
■Green:DCPower1
■Green:DCPower2
■Red:PowerFaultAlarm
8 x LED for PoE Copper Port (Ports 1 to 8):
■Green:LNK/ACT(10/100/1000Mbps)
■Amber:PoE-in-Use
2 x LED for 100/1000X Fiber Port (Ports 9 to 10):
■Green:LNK/ACT(100/1000Mbps)
■Amber:1000Mbps
4 x LED for PoE Usage
■Amber:60W,120W,180Wand240W
Power Requirements 48~56V DC, 6A (max.) 12~56V DC, 6A (max.)
Power Consumption
Max. 3.92 watts/13BTU@56V DC input (System)
Max. 7.28 watts/24BTU@56V DC input (Ethernet Full
Loading)
Max. 251.2 watts/857BTU@56V DC input (Ethernet +
PoE Full Loading)
Max. 5.6 watts/19BTU@56V DC input (System)
Max. 8.4 watts/29BTU@56V DC input (Ethernet Full
Loading)
Max. 252.1 watts/860BTU@56V DC input (Ethernet +
PoE Full Loading)
Dimensions(WxDxH) 66 x 106 x 152 mm 77 x 106 x 152mm
Weight 879g 1164g
Enclosure IP30 metal case IP30 aluminum case
Installation DIN-rail/ wall-mount/side wall-mount DIN-rail/ wall-mount
Specications