Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Gigabit PoE SwitchIndustrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Ethernet Switch (-40~75 degrees C)

Data Sheet

Key Features

IGS-1020PTF Series

Industrial 8-Port 10/100/1000T 802.3at PoE +

2-Port 100/1000X SFP Ethernet Switch

Physical Port

• Eight10/100/1000BASE-T Gigabit Ethernet RJ45 ports with

IEEE802.3af/atPoE+ Injector (Ports 1 to 8)

• Two100/1000BASE-XSFP slots for SFP transceiver type

auto detection (Ports 9 and 10)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 8 ports of IEEE 802.3af/802.3at devices powered

• 240-watt PoE budget

• Supports PoE power up to 30 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters

Industrial Case and Installation

• IP30 metal case (IGS-1020PTF); IP30 aluminum case (IGS-

1020PTF-12V)

• DIN-rail and wall-mount designs

• 48~56V DC (IGS-1020PTF)/12~56V (IGS-1020PTF-12V),

redundant power with reverse polarity protection

• Supports 6000V DC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

Switching

• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps

(full duplex), auto-negotiation and auto MDI/MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedltering

and forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressure for half duplex operation

• 8K MAC address table size

• 20Gbps switch fabric

• 9K jumbo frame

• Hardware-based DIP switch for “Standard” and “Extend”

mode selection; the “Extend”mode features 30-watt PoE

transmission distance of 250m at speed of 10Mbps

• Automatic address learning and address aging

Cost-effective Full PoE+ Power and Gigabit Extension Solution Ideal for

Hardened Environment

Featuring Plug and Play designed to be installed in heavy industrial demanding

environments, PLANET IGS-1020PTF series is an Industrial-grade, DIN-rail type

Unmanaged Gigabit Ethernet PoE+ Switch with eight10/100/1000BASE-T ports

featuring IEEE802.3atPoE+ and two100/1000BASE-Xber optic interfaces for

uplink connection.

The IGS-1020PTF series is designed with redundant power system and is able to

operate reliably, stably and quietly in any hardened environment without affecting

its performance. It comes with a total power budget of up to 240 watts for

different kinds of PoE applications and operating temperature ranging from -40 to

75 degrees C in a rugged IP30 metal housing.

Convenient and Reliable Power System

To facilitate the 802.3at PoE+ usage with the commonly-used 12~48V DC power

input for transportation and industrial-level applications, the IGS-1020PTF-

12V adopts 12~56VDCto54~56VDCpowerboosttechnology to solve

power source issue but does not require special power supplies. Its wide-

ranging voltages design is suitable for worldwide operability with high availability

applications requiring dual or backup power inputs.

Summary of content (6 pages)

PAGE 1
IGS-1020PTF Series Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Ethernet Switch Physical Port Key Features • Eight 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3af/at PoE+ Injector (Ports 1 to 8) • Two 100/1000BASE-X SFP slots for SFP transceiver type auto detection (Ports 9 and 10) Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.
PAGE 2
IGS-1020PTF Series Redundant Power Input 12~56V DC 100/1000X 54V DC PoE 802.3at PoE Compliant PD Device 10/100/1000T 12~56V DC to 54V DC PoE Power Boost 802.3at PoE+ Power and Ethernet Data Transmission Extension The IGS-1020PTF series has a built-in solid DIP switch providing “Standard” and “Extend” operation modes. The IGS-1020PTF series operates as a normal IEEE 802.3at PoE+ Switch in the “Standard” operation mode.
PAGE 3
IGS-1020PTF Series Fiber Optic Link Capability for Flexible Distance Extension The additional two mini-GBIC slots built in the IGS-1020PTF series supports SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (small form-factor pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
PAGE 4
IGS-1020PTF Series Flexible and Easy Installation with Limited Space The IGS-1020PTF series is designed to be installed in different environments, such as wall enclosure. It can be installed by fixed wall mounting, DIN rail or side wall mounting (for IGS-1020PTF only), thereby making its usability more flexible and easier in any space-limited location.
PAGE 5
IGS-1020PTF Series Perfect Integration Solution for IP PoE Camera and NVR System The IGS-1020PTF series provides eight 10/100/1000BASE-T 802.3at PoE+ ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the two 100/1000BASE-X SFP interfaces, the IGS-1020PTF series can connect to a core fiber switch and send video streams to an NVR and monitoring center.
PAGE 6
IGS-1020PTF Series ESD Protection 6KV Switch Specifications Switch Architecture Store-and-Forward Switch Fabric 20Gbps Throughput (packet per second) 14.8Mpps@64bytes Address Table 8K entries Buffer Memory 4M bits on-chip buffer memory Jumbo Frame 9Kbytes Flow Control Back pressure for half duplex IEEE 802.3x pause frame for full duplex Power over Ethernet PoE Standard IEEE 802.