Manualshelf

(V2) Quick Guide

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIP30 Industrial SNMP Switch 8-Port 100/1000FX + 2-Port 10/100/1000TX (SFP) (-40 ~ 75C)
12345678910
10
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Managed
Industrial Switch. The console port of the Industrial Managed Switch is DCE
already, so that you can connect the console port directly through PC without the
needofnullmodem.
PC/Workstation
with
Terminal emulation software
RJ45 to DB9 RS232 Cable
Serial Port
IP Address:
192.168.0.100
IGS Industrial Managed Switch
A terminal program is required to make the software connected to the IGS
Industrial Managed Switch. Windows’ Hyper Terminal program may be a good
choice.TheHyperTerminalcanbeaccessedfromtheStart menu.
1. Click START,thenPrograms, AccessoriesandthenHyper Terminal.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Parity:None
Databits:8
Stopbits:1
FlowControl:None