User Manual

Table Of Contents
User’s Manual of IGS-10080MFT
26
1.5 Product Specification
Model Name IGS-10080MFT
Hardware Specification
SFP/mini-GBIC Slots 8 100/1000Base-SX/LX mini-GBIC SFP slots
Copper Ports 2 10/100/1000Base-T Ethernet interface
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps / non-blocking
Throughput (packet per second) 14.8Mpps
Address Table 8K entries, automatic source address learning and ageing
Flow Control IEEE 802.3x Pause Frame for Full-Duplex. Back pressure for Half-Duplex
Jumbo Frame 9Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 Aluminum Metal Case
Installation DIN Rail Kit and Wall Mount Kit
Alarm One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green) **Note
R.O. (Green) **Note
Per 10/100/1000T RJ-45 Ports:
1000 (Green)
10/100, LNK/ACT (Orange)
Per SFP Interface:
1000 LNK/ACT (Green)
100 LNK/ACT (Orange)
Dimension (W x D x H) 152 x 107x 72mm
Weight 1036g
Power Requirement DC 12 to 48V, AC 24V Power Adapter
Power Consumption 13.92 Watts / 47.76BTU (Full loading)
Layer 2 function
Basic Management Interfaces Web Browser, Remote Telnet, SNMPv1, v2c
Secure Management Interface SSH, SSL, SNMP v3
Port configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Auto-detection / Forced 100/1000Mbps SFP Fiber transceiver speed.
Flow Control disable / enable
Power saving mode control
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status, trunk status.
Port Mirroring
TX / RX / Both
Many to 1 monitor
E.R.P.S. Ring (**Note) Recovery time <20ms
VLAN
802.1Q Tagged Based VLAN ,up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
Link Aggregation IEEE 802.3ad LACP / Static Trunk