Quick Guide
8
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a
PC or notebook computer and to RJ45 type serial (console) port of the
Industrial L2+ Managed Switch. The console port of the Industrial L2+
Managed Switch is DCE already, so that you can connect the console
port directly through PC without the need of null modem.
PC/Workstation with
Terminal emulation software
RJ45 to DB9 RS232 Cable
Serial Port
IGS Industrial
Managed Switch
Figure 4-1: Industrial L2+ Managed Switch Console Connectivity
A terminal program is required to make the software connected to the
Industrial L2+ Managed Switch. Putty or Tera Term may be a good
choice.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port
shouldbeconguredas:
Baud: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
FlowControl:None
Figure 4-2: COM Port Conguration