Quick Guide

12
5. Starting Web Management
The following shows how to start up the Web Management of the
Industrial L2+ Managed Switch. Note the Industrial L2+ Managed
Switchis congured through an Ethernet connection. Please make sure
the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Industrial L2+ Managed
Switch is 192.168.0.100, then the manager PC should be set to
192.168.0.x (where x is a number between 1 and 254, except 100),
and the default subnet mask is 255.255.255.0.
IP Address: 192.168.0.x
RJ45/UTP Cable
IP Address: 192.168.0.100
IGS Industrial Managed Switch
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial L2+ Managed Switch
1.Use Chrome 98.0.xxx or above for Web browser and enter IP
address http://192.168.0.100 (the factory-default IP address) to
access the Web interface.
2.When thefollowing dialog boxappears, please enterthe default user
name “admin” and password “admin” (or the password you have
changedbefore) asshowninFigure5-2.
DefaultIPAddress:192.168.0.100
DefaultUserName:admin
Default Password: admin
Figure 5-2: Web Login Screen