Quick Guide

18
6.RecoveringBacktoDefaultConguration
To reset the IP address to the default IP address “192.168.0.100” and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After the
device is rebooted, you can login the management Web interface within the same
subnet of 192.168.0.xx and default password. Be noted that all the previous
setupswillbedisappearedafterthefactorydefaultresetismade.
9
LNK/ACT1000LNK/ACT1000
10
Console
115200,N,8,1
P1 P2
Ring R.O.
FAULT
9 10
100/1000X SFP
RESET
LNK
ACT
LNK ACT
PoE-in-Use
Figure 6-1: IGS-10020PT/IGS-10020HPT Reset Button