Datasheet

IGS-10020PT
4
Management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1 and v2c switch management
– SSH/SSL and SNMP v3 secure access
• Four RMON groups (history, statistics, alarms, and events)
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via HTTP/TFTP
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP)
• SFP-DDM(Digital Diagnostic Monitor)
• Network Diagnositc
– ICMPv6/ICMPv4 Remote Ping
– Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deployment management
Intelligent Alive Check for Powered Device
The IGS-10020PT PoE Switch can be configured to monitor connected PD’s status
in real time via ping action. Once the PD stops working and responding, the IGS-
10020PT will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability owing that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-10020PT can effectively control the power supply
besides its capability of giving high watts power. The built-in “PoE schedule” function
helpsyoutoenableordisablePoEpowerfeedingforeachPoEportduringspecied
time intervals and it is a powerful function to help SMBs or enterprises save power
and money.
Digital Input and Digital Output for External Alarm
The IGS-10020PT supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external
device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the
IGS-10020PT port shows link down, link up or power failure.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption: 36 watts / hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts / hr during off-business hours
PoE PoE
Total Saved = 10800watts / month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off