Datasheet

IGS-10020PT
2
Redundant Ring, Fast Recovery for Surveillance System
The IGS-10020PT supports redundant ring technology and features strong rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-TG.8032ERPS(EthernetRingProtectionSwitching) technology,
Spanning Tree Protocol (802.1s MSTP), and redundant power supply system into
customer’s industrial automation network to enhance system reliability and uptime
in harsh factory environments. The IGS-10020PT also protects customer’s industrial
network connectivity with switching recovery capability that is used for implementing
fault tolerant ring and mesh network architectures. If the Industrial network was
interrupted accidentally, the fault recovery times could belessthan10ms to quickly
bring the network back to normal operation.
High Power PoE for Security and Public Service Applications
To fulfill the demand of High Power PoE for network applications with Gigabit
speed transmission under wide temperature, the new IGS-10020PT provides 8
10/100/1000Mbps ports featuringIEEE802.3at Power over Ethernet Plus (PoE+)
that combines up to240-watt power output and data per port over one Cat.5E/6
Ethernet cable. With a total 240-wattPoE budget on the whole system, the IGS-
10020PT is designed specifically to satisfy the growing demand of higher power
consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed
Domenetworkcameras, multi-channel (802.11a/b/g/n) wireless LAN access points
and other PoE network devices by providing PoE power, doubling that of the current
conventional 802.3af PoE.
Digital Input and Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture, and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4094 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports SpanningTreeProtocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol, spanning
tree by VLAN (MSTP)
– BPDU Guard
• Supports LinkAggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 5 trunk groups with 2 ports per trunk group
– Up to 4Gbps bandwidth (duplex mode)
• Provides port mirror (1-to-1)
• Portmirroringtomonitortheincomingoroutgoingtra󰀩cona
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Link Layer Discovery Protocol (LLDP)
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
1000BASE-SX/LX Fiber-optic
1000
PoE
1000BASE-T UTP with PoE
1000
1000
1000
1000
PoE
PoE
PoE
PoE
PoE
PoE
Recovery time < 10 ms
IGS-10020PT
IGS-10020PT
IGS-10020PT
Network Video
Recorder
Traffic Control Center
ERPS Ring for Video Transmission Redundancy