User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 Users Configuration
- 4.2.1.5 Privilege Levels
- 4.2.1.6 NTP Configuration
- 4.2.1.6.1 System Time Correction Manually
- 4.2.1.7 Time Configuration
- 4.2.1.8 UPnP
- 4.2.1.9 DHCP Relay
- 4.2.1.10 DHCP Relay Statistics
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.1.16 Fault Alarm
- 4.2.1.17 Digital Input/Output
- 4.2.2 Simple Network Management Protocol
- 4.2.3 RMON
- 4.2.4 DHCP server
- 4.2.5 Industrial Protocol
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLAN
- 4.3.3.1 VLAN Overview
- 4.3.3.2 IEEE 802.1Q VLAN
- 4.3.3.3 VLAN Port Configuration
- 4.3.3.4 VLAN Membership Status
- 4.3.3.5 VLAN Port Status
- 4.3.3.6 Private VLAN
- 4.3.3.7 Port Isolation
- 4.3.3.8 VLAN setting example:
- 4.3.3.8.1 Two Separate 802.1Q VLANs
- 4.3.3.8.2 VLAN Trunking between two 802.1Q aware switches
- 4.3.3.8.3 Port Isolate
- 4.3.3.9 MAC-based VLAN
- 4.3.3.10 IP Subnet-based VLAN Membership Configuration
- 4.3.3.11 Protocol-based VLAN
- 4.3.3.12 Protocol-based VLAN Membership
- 4.3.4 Spanning Tree Protocol
- 4.3.5 Multicast
- 4.3.6 MLD Snooping
- 4.3.7 MVR (Multicast VLAN Registration)
- 4.3.8 LLDP
- 4.3.9 MAC Address Table
- 4.3.10 Loop Protection
- 4.3.11 UDLD
- 4.3.12 GVRP
- 4.3.13 PTP
- 4.4 Quality of Service
- 4.5 Security
- 4.6 Ring
- 4.7 ONVIF
- 4.8 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of IGS series
19
1.5 Product Specifications
Model Name IGS-10020MT IGS-10080MFT IGS-12040MT IGS-20040MT
Hardware Specifications
Copper Ports
8
10/100/1000BASE-T
RJ45
2
10/100/1000BASE-T
RJ45
8
10/100/1000BASE-T
RJ45
16
10/100/1000BASE-T
RJ45
SFP/mini-GBIC Slots
2 1000BASE-SX/LX
SFP interfaces
(Port-9 and Port-10)
Compatible with
100BASE-FX SFP
8 1000BASE-SX/LX
SFP interfaces
Compatible with
100BASE-FX SFP
4 1000BASE-SX/LX
SFP interfaces
(Port-9 to Port-12)
Compatible with
100BASE-FX SFP
4 1000BASE-SX/LX
SFP interfaces
(Port-17 to Port-20)
Compatible with
100BASE-FX SFP
Console N/A
1 x RJ45 serial port
(115200, 8, N, 1)
1 x RJ45 serial port
(115200, 8, N, 1)
1 x RJ45 serial port
(115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric
20Gbps /
non-blocking
20Gbps /
non-blocking
24Gbps /
non-blocking
40Gbps /
non-blocking
Throughput (packet per
second)
14.8Mpps
14.8Mpps
17.85Mpps@64Bytes
25.6Mpps
Address Table 8K entries, automatic source address learning and ageing
Shared Data Buffer 4Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure
IP30 aluminum case
Installation DIN rail kit and wall-mount kit
Connector
Removable 6-pin
terminal block for
power input
Pin 1/2 for Power 1;
Pin 3/4 for fault
alarm; Pin 5/6 for
Power 2
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 0 & DI 1; Pin 3/4 for DO 0 & DO 1; Pin 5/6 for GND
Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC
Digital Input
2 Digital Input (DI)
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input load to 24V DC, 10mA max.
Digital Output
2 Digital Output (DO)