Quick Guide
9
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the
Industrial L2+ Managed Switch and the terminal will display “running
testingprocedures”.
Note
1.Therearethreeswitches(IGS-10080MFT/IGS-12040MT/
IGS-20040MT)withthe RJ45typeconsoleinterface.
2.The following console screen is based on the IGS-
10020HPT; the display of the IGS-10020HPT is the
same as that of the IGS-10080MFT/IGS-12040MT/
IGS-20040MT.
Then, the following message asks to log in user name and password
as shown in Figure 4-3. Please enter the factory default user name
"admin"andpassword“admin”.
Username:admin
Password:admin
Figure 4-3: Console Login Screen
Note
1. For security reason, please change and memorize
the new password after this first setup.
2. Only accept command in lowercase letter under
console interface.