Quick Guide

12
5. Starting Web Management
The following shows how to start up the Web Management of the
Industrial L2+ Managed Switch. Note the Industrial L2+ Managed
Switchis congured through an Ethernet connection. Please make sure
the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Industrial L2+ Managed
Switch is 192.168.0.100, then the manager PC should be set to
192.168.0.x (where x is a number between 1 and 254, except 100),
andthedefaultsubnetmaskis255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS Industrial Switch
RJ45/UTP-Cable
Figure 5-1: IP Management Diagram