IGS-10020MT(V3) Datasheet

IGS-10020MT
2
Redundant Ring, Fast Recovery for Surveillance System
The IGS-10020MT supports redundant ring technology and features strong rapid self-
recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology,
Spanning Tree Protocol (802.1s MSTP), and redundant power input system into
customer’s industrial automation network to enhance system reliability and uptime in
harsh factory environments. In certain simple Ring network, the recovery time of data
link can be as fast as 10ms.
SMTP/SNMP Trap Event Alert
The IGS-10020MT provides event alert function to help to diagnose the abnormal device
owing to whether or not there is a break of the network connection, or the rebooting
response.
Effective Alarm Alert for Better Protection
The IGS-10020MT supports a Fault Alarm feature which can alert the users when
there is something wrong with the switches. With this ideal feature, the users would not
have to waste time finding where the problem is. It will help to save time and human
resource.
Control Center
Factory
Warehouse
IP Camera
IGS-10020MT
IGS-10020MT
IGS-10020MT
IP Camera
802.11n AP
802.11n AP
100BASE-TX UTP
1000BASE-T UTP
ERPS Ring
Recovery
time <50 ms
blocks the ports on both ends of the link if the link fails at
any point between the two devices
• Link Layer Discovery Protocol (LLDP)
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route
summarization
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– IP TOS / DSCP / IP Precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing on the switch port
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4 IGMP Snooping port ltering
• IPv6 MLD Snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to lter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoong attacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Telnet Command Line Interface
– Web switch management
– SNMP v1 and v2c switch management
– SSH/TLS and SNMP v3 secure access
Fiber/RJ45 Connection
Link Down
DC/DC Power Failure
Fault Alarm Feature
SNMP
TRAP
Mail
or
System
Log