IGS-10020MT(V3) Datasheet

Data Sheet
1
IGS-10020MT
1
Industrial L2+ 8-Port 10/100/1000T + 2 100/1000X
SFP Managed Switch
PLANET IGS-10020MT is a fully-managed Gigabit fiber switch usually designed
for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2
100/1000BASE-X SFP ports and redundant power system in an IP30 rugged but
compact-sized case that can be installed in any difficult environment without space
limitation. Within such favorable enclosure, it provides user-friendly yet advanced IPv6/
IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static
routing capability. The IGS-10020MT can operate stably under the temperature range
from -40 to 75 degrees C and allows either DIN-rail or wall mounting for efcient use of
cabinet space. With 2 dual-speed SFP fiber slots, it can be flexibly applied to extend
the connection distance.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature that virtually needs no effort and cost to have includes
the protection of the switch management and the enhanced security of the mission-
critical network. Both SSH and TLS protocols are utilized to provide strong protection
against advanced threats. It includes a range of cybersecurity features such as
DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based
and MAC-based network access control, RADIUS and TACACS+ user accounts
management, SNMPv3 authentication, and so on to complement it as an all-security
solution. The network administrator can now construct highly-secure corporate networks
with considerably less time and effort than before.
Physical Port
• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection
Industrial Case / Installation
• IP30 aluminum case protection
• DIN-rail or wall-mount design
• Redundant power design
– 12 to 48V DC, redundant power with polarity reverse
protect function
– AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Industrial Protocol
• Modbus TCP for real-time monitoring in SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol)
Layer 2 Features
• High performance of Store-and-Forward architecture and
runt/CRC ltering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support
– Broadcast, Multicast and Unknown Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4095 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 5 trunk groups, up to 10 ports per trunk group
– Up to 20Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection
(UDLD) that monitors a link between two switches and