Datasheet
2
IGS-10020MT
– 802.3ad Link Aggregation Control Protocol (LACP
– Cisco ether-channel (static trunk)
– Maximum 5 trunk groups, up to 10 ports per trunk group
– Up to 20Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing trafc on a
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection (UDLD)
that monitors a link between two switches and blocks the ports
on both ends of the link if the link fails at any point between
the two devices
• Link Layer Discovery Protocol (LLDP)
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– IP TOS / DSCP / IP Precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing on the switch port
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4 IGMP Snooping port ltering
• IPv6 MLD Snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
Redundant Ring, Fast Recovery for Surveillance System
The IGS-10020MT supports redundant ring technology and features strong
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In certain simple Ring
network, the recovery time of data link can be as fast as 10ms.
Factory
Control Center
Control Center
Warehouse
IGS-10020MT
IGS-10020MT
ERPS Ring
IGS-10020MT
Wireless AP
IP Camera
Wireless AP
1000
1000
1000
1000BASE-SX/LX Fiber Optic
1000BASE-T UTP
1000
SMTP/SNMP Trap Event Alert
The IGS-10020MT provides event alert function to help to diagnose the abnormal
device owing to whether or not there is a break of the network connection, or the
rebooting response.
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible
Management
To help customers stay on top of their businesses, the IGS-10020MT not only
provides high transmission performance and excellent Layer 2 technologies, but
also IPv4/IPv6 software VLAN routing feature which allows to cross over different
VLANs and different IP addresses for the purpose of having a highly-secure,
exible management and simpler networking application.