Quick Guide

11
Figure 4-5: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
Storethecurrentswitchconguration
5.At the “#” prompt, enter the following command and press
<Enter>.
# copy running-cong startup-cong
Figure 4-6: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial L2+ Managed Switch
will apply the new IP address setting immediately. You can access the
Web interface of the Industrial L2+ Managed Switch through the new
IP address.
Note
If you are not familiar with the console command or the
related parameter, enter “help” anytime in console to
get the help description.