(V3) Datasheet
IGS-10020HPT
4
IGS-10020HPT
4
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay
• DHCP Option82
• DHCP Server Mode support
• User Privilege levels control
• NTP (Network Time Protocol)
• Link OAM
• Network Diagnostic
– ICMPv6/ICMPv4 Remote Ping
– Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Link up and Link down notication
• System Log
• SFP-DDM (Digital Diagnostic Monitor)
• PLANET Smart Discovery Utility for deployment management
Intelligent Powered Device Alive Check
The IGS-10020HPT PoE Switch can be configured to monitor connected PD’s status
in real time via ping action. Once the PD stops working and responding, the IGS-
10020HPT will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
Scheduled Power Recycling
The IGS-10020HPT allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specic time each week. Therefore, it will
reduce the chance of IP camera or AP crash resulting from buffer overow.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
Built-in Unique PoE Functions for Surveillance Management
As an Industrial managed PoE Switch for surveillance network, the IGS-10020HPT
features the following intelligent PoE management functions:
■
PDAliveCheck
■
ScheduledPowerRecycling
■
PoESchedule
■
SMTP/SNMPTrapEventAlert