(V3) Datasheet

IGS-10020HPT
1
L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X
SFP Managed Switch with Wide Operating Temperature
Environmentally Hardened Design
PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-10020HPT, is equipped
with a rugged IP30 metal case for stable operation in heavy industrial demanding
environments. Thus, the IGS-10020HPT provides a high level of immunity against
electromagnetic interference and heavy electrical surges which are usually found on
plant oors or in curbside trafc control cabinets.
Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-
10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also
allows either DIN rail or wall mounting for efcient use of cabinet space.
Physical Port
• 810/100/1000BASE-TGigabit Ethernet RJ45 ports with IEEE
802.3atPoE+ Injector
• 2100/1000BASE-Xmini-GBIC/SFP slots for SFP type auto
detection
• One RJ45 console interface for basic management and setup
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus/end-
span PSE
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
– PoE admin-mode control
– PoE management mode selection
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limit
– PoE Port Status monitoring
– PD classication detection
– Sequence port PoE
• Intelligent PoE features
– PoE Legacy mode enable/disable
– Temperature threshold control
– PoE usage threshold control
– PoE schedule
– PD alive check
– LLDP PoE Neighbors
Industrial Protocol
• Modbus TCP for real-time monitoring in a SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol)
Industrial Case & Installation
• IP30 aluminum case protection
• DIN rail and wall-mount design
• DC 12-48V, redundant power with polarity reverse protect
function
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• E-Mark certication
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-10020HPT supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-TG.8032ERPS(EthernetRingProtectionSwitching) technology,
Spanning Tree Protocol (802.1s MSTP), and redundantpower input system into
customer’s industrial automation network to enhance system reliability and uptime in
harsh factory environments.