Datasheet

IGS-10020HPT
6
Digital Input and Digital Output for External Alarm
The IGS-10020HPT supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and
log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the
administrators if the IGS-10020HPT port shows link down, link up or power failure.
Alarm Warning Alarm MessagingSecurity OK!!
Digital Input
Digital Output
Uplink
DC Power Failure
Door Detector
(Door Open)
System Log
SNMP
TRAP
Mail
Enclosure Enclosure
Door Detector
(Door Closed)
I/O
I/O
I/O
I/O
I/O
I/O
I/O I/O
Fiber Cable
Link Down
RJ45 Cable
Link Down
I/O I/O
I/O
I/O
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the IGS-10020HPT not only provides ultra high transmission performance and excellent Layer 2
technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of
having a highly-secure, exible management and simpler networking application.
Robust Layer 2 Features
The IGS-10020HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN,
Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-10020HPT provides 802.1Q tagged VLAN, and
the VLAN groups allowed will be maximally up to 4K. Via aggregation of supporting ports, the IGS-10020HPT allows the operation of a high-speed trunk
combining multiple ports. It enables a maximum of up to 5 trunk groups with 10 ports per trunk group, and supports fail-over as well.
L2/L4
Managed Switch
L2/L4
Managed Switch
Q-in-Q
MSTP
MLD
LLDP
IGMP
QoS
LACP