Datasheet

IGS-10020HPT
4
IGS-10020HPT
4
BOOTP and DHCP for IP address assignment
System Maintenance
Firmware upload/download via HTTP
Reset button for system reboot or reset to factory default
Dual Images
DHCP Relay
DHCP Option82
DHCP Server Mode support
User Privilege levels control
NTP (Network Time Protocol)
Link OAM
Network Diagnostic
ICMPv6/ICMPv4 Remote Ping
Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
SMTP/Syslog remote alarm
Four RMON groups (history, statistics, alarms and events)
SNMP trap for interface Link up and Link down notication
System Log
SFP-DDM (Digital Diagnostic Monitor)
PLANET Smart Discovery Utility for deployment management
PLANET NMS system and CloudViewer for deployment
management
Built-in Unique PoE Functions for Surveillance Management
As an Industrial managed PoE Switch for surveillance network, the IGS-10020HPT
features the following intelligent PoE management functions:
PD Alive Check
Scheduled Power Recycling
PoE Schedule
SMTP/SNMP Trap Event Alert
Intelligent Powered Device Alive Check
The IGS-10020HPT PoE Switch can be configured to monitor connected PD’s status
in real time via ping action. Once the PD stops working and responding, the IGS-
10020HPT will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
PD Alive Check
Restart PoE device if without response
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE
ON OFF
Restart PoE Device
Step 4
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
Alarm Notification
Scheduled Power Recycling
The IGS-10020HPT allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will
reduce the chance of IP camera or AP crash resulting from buffer overow.
IP Camera
S M T W T F S
AP Router IP Phone
PoE lighting
Door Phone
Automatically Reboot