Datasheet

IGS-10020HPT
3
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing policies on the switch port
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port ltering
• IPv6 MLD snooping port ltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnooping to lter un-trusted DHCP messages
• DynamicARPInspectiondiscards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuard prevents IP spoong attacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSHv2 and TLSv1.2 secure access
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
High Power PoE for Security and Public Service Applications
To fulfill the demand of High Power PoE for network applications with Gigabit speed
transmission under wide temperature, the IGS-10020HPT provides 8 10/100/1000Mbps
ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-
watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole
system comes with a total 240-watt PoE budget, the IGS-10020HPT is designed
specifically to satisfy the growing demand of higher power consuming network PDs
(powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points,
PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices,
doubling that of the current conventional 802.3af PoE.
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with video IP surveillances. From the IGS-
10020HPT’s GUI, you just need one click to search and show all of the ONVIF devices
via network application. In addition, you can upload floor images to the switch and
can remotely monitor or inspect an assembly line. Moreover, you can get real-time
surveillance information and online/ofine status; the PoE reboot can be controlled from
the GUI