User's Manual

19
2.2.2 Wall-mount Plate Mounting
To install the Industrial Media Converter on the wall, please
follow the instructions described below:
Step 1: Remove the DIN-rail from the Industrial Media
Converter; loosen the screws to remove the DIN-rail.
Step 2: Place the wall-mount plate on the rear panel of the
Industrial Media Converter.
Step 3: Use the screws to screw the wall-mount plate on the
Industrial Media Converter.
Step 4: Use the hook holes at the corners of the wall-
mount plate to hang the Industrial Media Converter
on the wall.
Step 5: To remove the wall-mount plate, reverse the steps
above.