Datasheet

IFT-802T / IFT-802TS15 / IFT-805AT
3
Specications
Product
IFT-802T / IFT-802TS15 / IFT-805AT
10/100Base-TX Port
1 RJ-45 auto-MDI / MDI-X port
100Base-FX Port
IFT-802T: 1 SC interface
IFT-802TS15: 1 SC interface
IFT-805AT: 1 SFP slot
Fiber Port Type
IFT-802T: SC / multi-mode
IFT-802TS15: SC / single-mode
IFT-805AT: Vary on module
Cable Distance
IFT-802T: 2km
IFT-802TS15: 15km
IFT-805AT: Vary on module
Optical Frequency
IFT-802T: 1310nm
IFT-802TS15: 1310nm
IFT-805AT: Vary on module
Launch Power (dBm)
Max
IFT-802T: -14
IFT-802TS15: 0
Min
IFT-802T: -20
IFT-802TS15: -20
Vary on module
IFT- 805AT
Receive Sensitivity (dBm)
IFT-802T: - 32
IFT-802TS15: -32
IFT-805AT: Vary on module
Maximum Input Power (dBm)
IFT-802T: -14
IFT-802TS15: 0
IFT-805AT: Vary on module
Dimensions (W x D x H) 135 x 85 x 32 mm
Weight 430g
Installation DIN rail kit and wall mount ear
Maximum Frame Size 1522bytes packet size
Flow Control Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Enclosure IP-30 slim type metal case
LED Indicator
System:
▪ Power 1 (Green)
▪ Power 2 (Green)
▪ Fault (Green)
1 x copper port:
▪ 10/100 (Green)
▪ LNK/ACT (Green)
1 x 100FX port:
▪ 100 (Green)
▪ LNK/ACT (Green)
Power Input 12 to 48V DC redundant power with polarity reverse protection function
Power Consumption 3 watts / 10BTU (maximum)
Protection
ESD (Ethernet): 6KVDC
Surge (Power): 6KVDC
Speed
Twisted-pair:
▪ 10/20Mbps for half / full duplex
▪ 100/200Mbps for half / full duplex
Fiber-optic:
▪ 200Mbps for full duplex
Network cables
10/100Base-TX:
2-pair UTP Cat. 3, 4, 5 (100 meters, max.)
EIA/TIA-568 100-ohm STP (100 meters, max.)
100Base-FX:
IFT-802T: Multi-mode optical ber 62.5/125μm / 50/125μm (2km)
IFT-802TS15: Single-mode optical ber 9/125μm (15km)
IFT-805AT: SFP slot (depending on SFP module)