Datasheet

IFGS-1822TF

Specications

Product

IFGS-1822TF

Hardware Specications

Fast Ethernet Copper Ports 16 10/100BASE-TX RJ45 auto-MDI/MDI-X ports

Gigabit Ethernet Copper Ports Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (shared with Port-17 and Port-18)

SFP Slots Two 1000BASE-SX/LX/BX SFP interfaces (shared with Port-17 and Port-18)

Switch Architecture Store-and-Forward

Switch Fabric 7.2Gbps (non-blocking)

Throughput (packet per second) 5.36Mpps@ 64 bytes

Address Table 16K entries, automatic source address learning and aging

Shared Data Buffer 4Mbits

Flow Control

IEEE 802.3x pause frame for full duplex

Back pressure for half duplex

ESD Protection 6KV DC

Enclosure IP30 metal case

Installation DIN-rail kit and wall-mount kit

Connector

Removable 6-pin terminal block for power input

Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC

Dimensions (W x D x H) 66 x 107 x 152 mm

Weight 300g

Power Requirements Dual 12~48V DC or one 24V AC

Power Consumption Max. 6.3 watts/21.4BTU (Ethernet full loading)

Standards Conformance

Regulatory Compliance FCC Part 15 Class A, CE

PoE Power Output 30 watts

Stability Testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab Gigabit 1000T

IEEE 802.3z Gigabit SX/LX

IEEE 802.3x ow control and back pressure

IEEE 802.1p Class of Service

IEEE 802.3az Energy Efcient Ethernet (EEE)

Environment

Operating Temperature -40 ~ 75 degrees C

Storage Temperature -40 ~ 85 degrees C

Humidity 5 ~ 95% (non-condensing)