User's Manual

7
2.3 LED Indicators
System
LED Color Function
P1 Green Lit: Indicates power 1 has power.
P2 Green Lit: Indicates power 2 has power.
FAULT Red Lit: Indicates neither power 1 nor power 2 has power.
Per 802.3at PoE+ 10/100BASE-TX Interface (Port 1 to Port 8)
LED Color Function
LNK/
ACT
Green
Lit: Indicates the link through that port is successfully
established at 10Mbps or 100Mbps.
Blinking: Indicates that the switch is actively sending or
receiving data over that port.
PoE
In-Use
Orange
Lit: Indicates the port is providing DC in-line power.
O: Indicates the connected device is not a PoE powered
device (PD).
Per 10/100/1000BASE-T Interface (Shared with Port 9 to Port 10)
LED Color Function
LNK/
ACT
Green
Lit: Indicates the link through that port is successfully
established at 10/100/1000Mbps.
Blinking: Indicates that the switch is actively sending or
receiving data over that port.
1000 Orange
Lit: Indicates the link through that port is successfully
established at 1000Mbps.
O: Indicates the link through that port is successfully
established at 10/100Mbps.
Per 1000X SFP Slot (Shared with Port 9 to Port 10)
LED Color Function
LNK/
ACT
Green
Lit: Indicates the link through that port is successfully
established at 1000Mbps.
Blinking: Indicates that the switch is actively sending or
receiving data over that port.
1000 Orange
Lit: Indicates the link through that port is successfully
established at 1000Mbps.
O: Indicates the link through that port is not established.