User's Manual

6
 DIP Switch
The Industrial PoE+ Switch has a built-in solid DIP switch that provides
“Standard” and “Extend” operation modes. The Industrial PoE+ Switch operates
as a normal IEEE 802.af/at PoE+ Switch in the “Standard” operation mode.
In the “Extend” operation mode, the Industrial PoE+ Switch operates on a per-
port basis at 10Mbps full duplex operation but can support 30-watt PoE power
output over a distance of up to 250 meters overcoming the 100m limit on Ethernet
UTP cable. With this brand-new feature, the Industrial PoE+ Switch provides an
additional solution for 802.3af/at PoE+ distance extension.
Extended PoE Mode
250 meters (820 feet)
Default PoE Mode
100 meters (328 feet)
PoE
PoE IP
Camera
PoE
PoE
100BASE-TX UTP with PoE
PoE IP
Camera
FaultP2 P1
Extended Standard
Long Reach Mode
1
2
3
4 5 6 7 8
DIP ON
FaultP2 P1
Extended Standard
Long Reach Mode
1
2
3
4 5 6 7 8
DIP ON