Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Fast Ethernet PoE SwitchIndustrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch
11121314151617181920
16
3.2 Wall-mount Plate Mounting
To install the Industrial PoE+ Switch on the wall, please follow the instructions
described below.
Step 1: To remove the DIN-rail bracket from the Industrial PoE+ Switch, loosen
the screws to remove the DIN-rail bracket.
Step 2: Place the wall-mount plate on the rear panel of the Industrial PoE+
Switch.
Step 3: Use the screws to screw the wall-mount plate on the Industrial PoE+
Switch.
Step 4: Use the hook holes at the corners of the wall-mount plate to hang the
Industrial PoE+ Switch on the wall.
Step 5: To remove the wall-mount plate, reverse the steps above.