User's Manual

11
 Industrial Case and Installation
 IP30 metal case
 DIN-rail and wall-mount designs
 48~56V DC, redundant power with reverse polarity protection
 Supports 6000V DC Ethernet ESD protection
 -40 to 75 degrees C operating temperature
 Switching
 Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-
negotiation and auto MDI/MDI-X
 Features Store-and-Forward mode with wire-speed ltering and forwarding
rates
 IEEE 802.3x ow control for full duplex operation and back pressure for half
duplex operation
 16K MAC address table size
 10K jumbo frame
 IEEE 802.1Q VLAN transparency
 Hardware-based DIP switch for “Standard” and “Extend” mode selection;
the “Extend” mode features 30-watt PoE transmission distance of 250m at
speed of 10Mbps
 Automatic address learning and address aging
 Supports CSMA/CD protocol
2.8 ProductSpecications
Product IFGS-1022HPT
HardwareSpecications
Fast Ethernet Copper Ports
Eight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
(Port-1 to Port-8)
Gigabit Ethernet Copper Ports
Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X
ports (shared with Port-9 and Port-10)
SFP/mini-GBIC Slots
Two 1000BASE-SX/LX/BX SFP interfaces
(shared with Port-9 and Port-10)
PoE Injector Port
Eight ports with 802.3af/802.3at PoE+ injector
function (Port-1 to Port-8)
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps/non-blocking