Datasheet

IFGS-1022HPT
4
Perfect Integration Solution for IP PoE Camera and NVR System
The IFGS-1022HPT provides eight 10/100BASE-TX 802.3at PoE+ ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In
addition, with the two 1000BASE-X SFP combo interfaces, the IFGS-1022HPT can connect to a core fiber switch and send video streams to an NVR and
monitoringcenter.Throughthehigh-performance switch architecture,theIFGS-1022HPTfacilitatestherecordedvideolesfromthe8PoE+IPcamerasto
be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The
IFGS-1022HPT undoubtedly brings an ideal secure surveillance system at a lower total cost.
Outdoor
IP Camera
PoE
Fiber Optic Cable
up to 120km
Fiber Optic Cable
up to 120km
Ethernet up to
100 meters
Extending Ethernet Distance
Gigabit Fiber Switch
Network Video
Recorder
Outdoor
IP Camera
IFGS-1022HPT
240km
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
PoE
100BASE-TX UTP with PoE
PoE
IFGS-1022HPT
PoE PoE
PoE
Product
IFGS-1022HPT
HardwareSpecications
Fast Ethernet Copper Ports Eight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-8)
Gigabit Ethernet Copper Ports
Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
(shared with Port-9 and Port-10)
SFP/mini-GBIC Slots Two 1000BASE-SX/LX/BX SFP interfaces (shared with Port-9 and Port-10)
PoE Injector Port Eight ports with 802.3af/802.3at PoE+ injector function (Port-1 to Port-8)
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps/non-blocking
Switch Throughput@64 bytes 4.1Mpps @64 bytes
MAC Address Table 16K entries
Shared Data Buffer 4Mb SRAM
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
DIP Switch (Port-1 to Port-8)
Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps
Extend mode: 30-watt PoE transmit distance of 250m at speed of 10Mbps
LED
3 x LED for System and Power:
■Green: DC Power 1
■Green: DC Power 2
■Red: Power Fault Alarm
2 x LED for PoE Copper Port (Port-1~Port-8):
■Green: LNK/ACT (10/100Mbps)
■Orange: PoE-In-Use
2 x LED for 10/100/1000T Copper Port (Port-9~Port-10):
■Green: LNK/ACT
■Orange: 1000
2 x LED for per mini-GBIC interface (Port-9~Port-10)
■Green: LNK/ACT
■Orange: 1000
Specications