Datasheet

Data Sheet
1
Key Features
IFGS-1022HPT
1
Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/
SFP Combo Ethernet Switch (-40~75 degrees C)
Physical Port
• Eight10/100BASE-TX Fast Ethernet RJ45 ports with IEEE
802.3at/afPoE+ Injector function (Port-1 to Port-8)
• Two10/100/1000BASE-TGigabit Ethernet RJ45 ports (Port-
9 and Port-10)
• Two1000BASE-Xmini-GBIC/SFP slots for SFP type auto
detection (Port-9 and Port-10)
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• 240-watt PoE budget
• Supports PoE power up to 30 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
Industrial Case and Installation
• IP30 metal case
• DIN-rail and wall-mount designs
• 48~56V DC, redundant power with reverse polarity protection
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Switching
• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps
(full duplex), auto-negotiation and auto MDI/MDI-X
• FeaturesStore-and-Forwardmodewithwire-speedltering
and forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation
• 16K MAC address table size
• 10K jumbo frame
• IEEE 802.1Q VLAN transparency
• Hardware-based DIP switch for “Standard”and “Extend”
mode selection; the“Extend”mode features 30-watt PoE
transmit distance of 250m at speed of 10Mbps
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Cost-effective Full PoE+ Power and Gigabit Extension Solution Ideal for
Hardened Environment
Designed to be plug-and-play installed in heavy industrial demanding
environments, the IFGS-1022HPT is a new member of PLANET Industrial-grade,
DIN-rail type Unmanaged Fast Ethernet PoE+ Switch family with810/100BASE-
TX ports featuring 30-watt802.3atPoE+, and 2additionalGigabitcopper/SFP
combointerfaces for Gigabit Ethernet extension and video uplink.
The IFGS-1022HPT is designed with redundant power system and is able to
operate reliably, stably and quietly in any hardened environment without affecting
its performance. It comes with a total power budget of up to 240watts for
different kinds of PoE applications and operating temperature ranging from -40 to
75 degrees C in a rugged IP30 metal housing.
802.3at PoE+ Power and Ethernet Data Transmit Distance Extension
The IFGS-1022HPT has a built-in solid DIP switch providing“Standard” and
“Extend”operation modes. The IFGS-1022HPT operates as a normal IEEE
802.3af/at PoE+ Switch in the “Standard” operation mode. In the “Extend”
operation mode, the IFGS-1022HPT operates on a per-port basis at 10Mbps full
duplex operation and can support 30-watt PoE power output over a distance of
up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.