- Planet IP DSLAM Switch User's Manual

5.5 Ethernet Interface Mode Commands
The commands in this section can be executed only in the Ethernet Interface execution
mode.
5.5.1 bridge
Description Enter bridge configuration mode / Set bridge port to default status
Syntax bridge [default]
Parameter None
5.5.2 gbe admin
Description Set Gigabit Ethernet administrative status (ON/OFF)
Syntax gbe admin {on | off}
Parameter None
5.5.3 gbe speed
Description Set Gigabit ethernet speed to auto-negotiate, 100Mbps half
duplexing, or 100Mbps full duplexing
Syntax gbe speed {auto | half_100mbps | full_100mbps }
Parameter None
- 288 -