- Planet IP DSLAM Switch User's Manual

5.4.73 remotecfg login
Description Login FTP server to get remote configuration and load it to running
configuration or write remote configuration to memory
Syntax remotecfg login <ipv4 address> get <filename> {load | write partition
<number>}
Parameter
Name Description
<ipv4 address> IP address of TFTP server.
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
<filename> Remote path and file name (max 31
character)
Default value: -
Type: Mandatory
<number> Partition number
Valid values: 1~2
Default value: -
Type: Mandatory
5.4.74 restore-factory
Description Restore factory setting (User needs to restart the system after
restore-factory to make the setting take effect.)
Syntax restore-factory
Parameter None
5.4.75 rmon alarm <index> alarm_interval
Description Set RMON alarm interval
Syntax rmon alarm <index> alarm_interval <number>
Parameter
Name Description
<index> RMON alarm entry index
Valid values: 1~64
Default value: -
Type: Mandatory
<number> Alarm interval.
Valid values: 0~2147483647 (0: disable)
- 265 -