ICS-Series User Manual

User’s Manual of ICS-11x Serial Device Server Series
73
5.3 COM Port Mapping
This function should be set as VCOM mode on the serial server. VCOM software will create the corresponding virtual COM
ports for com port mapping as shown in Figure 5-3-1.
Figure 5-3-1 : VCOM software
Add Virtual COM port
1. Click "Search" to search the network for device servers.
2. Once a server has been found, select it to add it to the COM mapping list and Click "OK" to take effect as shown in Figure
5-3-2.
Figure 5-3-2 : VCOM software
3. Virtual com ports are generated as shown in Figure 5-3-3.
Figure 5-3-3 : Virtual COM Ports