ICS-Series User Manual

User’s Manual of ICS-11x Serial Device Server Series
67
4.7 Maintenance
Use the Port Menu to display or configure the Serial Server's ports. This section includes the page that displays current port
configurations. Ports can also be configured here.
4.7.1 Change Password
After logging in to the serial server, user can make changes from the "Change Password" page. The Change Password screen
in Figure 4-7-1 appears.
Figure 4-7-1: Change Password Page Screenshot
The page includes the following fields:
Object Description
• New Password
A new password. It allows strings like A-Z, a-z, _ ,0-9
• Confirm Password
Please enter the user’s new password here again to confirm.
4.7.2 Load Default
A user can reset the configuration of the serial server on this page. The new configuration will applied after restarting system.
The Load Default screen in Figure 4-7-2 appears.
Figure 4-7-2: Reset to Default Page Screenshot
Buttons
: Click to reset to default.