ICS-Series User Manual

User’s Manual of ICS-11x Serial Device Server Series
46
4.5.2 Operation mode
The serial server makes connected Serial equipment become IP-based. That also makes them able to connect to a TCP/IP
networking immediately. The serial server allows traditional Computer/Client COM ports access to a serial equipment anywhere
on the Ethernet LAN network.
This operation mode can be set up as Disable, Remote Pair Master/Slave, RF2217, Serial Telnet, TCP Server, TCP Client,
UDP, Virtual COM and Modbus Converter Server/Client. The operation mode screen in Figure 4-5-3 appears.
Figure 4-5-3: Operation Mode Screenshot
4.5.2.1 Disable mode
When selecting disabled operation mode, the device port can be disabled. The disable mode screen in Figure 4-5-4 appears.
Figure 4-5-4: Disable Mode Screenshot
Object Description
• Apply to all serial
ports
To apply this configuration to all serial ports.
Buttons
: Click to apply port config changes.
When applying any configuration changes of serial server, it’s required to
save changed
configuration and reboot system. Therefore the new configuration will be applied after rebooting.