ICS-Series User Manual

User’s Manual of ICS-11x Serial Device Server Series
30
2. After setup is completed, press the “Update Device”, “Update Multi” or “Update All” button to take effect. The functions of
the 3 buttons above are shown below:
 Update Device: Use current setting on one single device.
 Update Multi: Use current setting on multi-devices.
 Update All: Use current setting on whole devices in the list.
The same functions mentioned above also can be found in “Option” tools bar.
3. To click the “Control Packet Force Broadcast” function, it allows you to assign a new setting value to the Web Smart
Switch under a different IP subnet address.
4. Press the “Connect to Device” button and the Web login screen appears as shown in Figure 3-4-2.
5. Press the “Exit” button to shut down the Planet Smart Discovery Utility.