User Manual

User’s Manual of ICS-10x
-31-
8. Enter the host address and port number, and then click OK.
Figure 4-19 Example: Hyper Terminal configuration
Value Description
Host address dard Internet The address or name of the connection you want to create. This can be in stan
dotted notation (for example, w.x.y.z) or can be the site's user-friendly name.
port The number of the port that you want the connection to use. Port 23 is the default.
9. Then can use the serial console cable to connect with the switch.
Figure 4-20 TCP/IP Winsock connection screen