Media Converter User's Manual

User’s Manual of ICS-10x
-35-
Hyper Terminal setup a new connection with virtual COM port
5. On the File menu, click New Connection.
6. In the Name box, type a name that describes the connection.
7. In the Icon box, click the appropriate icon, and then click OK.
Figure 4-32 Example: HyperTerminal Configuration screen
8. In the Connect to dialog box, choose which port you want to use in the Connect using drop-down box. In this case,
choose COM9 (as created in Step-4)
Figure 4-33 Example: HyperTerminal Configuration screen
9. Set the parameter like below, click “Apply” to take effect.