Media Converter User's Manual

User’s Manual of ICS-10x
-24-
 Other ICS-10x with TCP Client mode
It opens the TCP port of ICS-10x to wait for serial application to establish a TCP connection. After the connection is
established, data can be transmitted in both directions.
The parameter defines the maintenance status for listen for the TCP connection.
Figure 4-12 TCP Server mode
The screen in Figure 4-13 appears. When the changed operation mode, the user should be changed the Serial Port
Configuration.
Figure 4-13 TCP Server Configuration screen
The page includes the following fields:
• Serial Port Operation
Mode
Choose different mode:
 TCP Server
 TCP Client
 UDP Client
 Virtual COM
 Telnet Server
 Pair connection (local)
 Pair connection (Master)
The default mode is “TCP Server”.
• TCP Port Number
The TCP port that ICS-10X uses to listen to connections and that other device
must use to contact ICS-10X. To avoid conflicts with well known TCP ports, the
default is set to “1024”.