ICG-2515(W)-NR User Manual
Table Of Contents
Industrial 5G NR Cellular Gateway
ICG-2515-NR series
- 68 -
4.5.2 WAN
This page is used to configure the parameters for Internet network which connects to the WAN port of
the cellular gateway as shown in Figure 4-5-3. Here you may select the access method by clicking the
item value of WAN access type.
Figure 4-5-3: WAN
Object
Description
WAN Access Type
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Static
Select Static IP Address if all the Internet ports’ IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The cellular gateway will not accept the
IP address if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
Netmask