ICG-2515(W)-NR User Manual

Industrial 5G NR Cellular Gateway
ICG-2515-NR series
- 44 -
Step 4: WAN Interface
The cellular gateway supports two access modes on the WAN side shown in Figure 4-4-6
Figure 4-4-6: Setup Wizard – WAN Configuration
Mode 1 -- Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will
need to enter the IP Address, Netmask, Default Gateway and DNS Server provided to you by your
ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets
separated by a dot (x.x.x.x). The cellular gateway will not accept the IP address if it is not in this format.
The setup is shown in Figure 4-4-7.
Figure 4-4-7: WAN Interface Setup – Static IP Setup
Object
Description
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Netmask assigned by your ISP.