Quick Guide
11
4. Starting Web Management
The following shows how to start up the Web Management of the
Cellular Gateway. Note the Cellular Gateway is congured through an
Ethernet connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0.
Device IP
192.168.1.1
PC/Workstation with
IP 192.168.1.x
RJ45/UTP Cable
ICG-2515 Series
Figure 4-1: IP Management Diagram
Note
The DHCP server of the Cellular Gateway is enabled.
Therefore, the LAN PC will get IP from the Cellular
Gateway.