Quick Guide

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4. Starting Web Management
The following shows how to start up the Web Management of
the Cellular Gateway. Note the Cellular Gateway is congured
through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
For example, the default IP address of the Cellular Gateway
is 192.168.1.1, then the manager PC should be set to
192.168.1.x (where x is a number between 2 and 254), and
the default subnet mask is 255.255.255.0.
Device IP
192.168.1.1
PC/Workstation with
IP 192.168.1.x
RJ45/UTP Cable
ICG-2515-NR Series
Figure 4-1: IP Management Diagram
The DHCP server of the Cellular Gateway is
enabled. Therefore, the LAN PC will get IP from
the Cellular Gateway.
3. After entering the password, the main screen appears as
shown in Figure 4-3.
Figure 4-3: Web-based Main Screen of Cellular Gateway
Now, you can use the Web management interface to continue
the Cellular Gateway management or manage the Cellular
Gateway by console interface. Please refer to the user’s manual
for more.
Administrators are strongly suggested to change the default
passwordandWi-FiSSIDontherstlogintosafeguardsystem
security.
4.1 Logging in to the Cellular Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter
IP address http://192.168.1.1 (the factory default IP
address or the one that you have just changed in console)
to access the Web interface.
2. When the following dialog box appears, please enter the
default user name “admin” and password “admin” (or the
password you have changed before) as shown in Figure 4-2.
Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID (2.4G): PLANET_2.4G (for ICG-2515W-NR)
Default SSID (5G): PLANET_5G (for ICG-2515W-NR)
Figure 4-2: Login Screen
5. Recovering Back to Default
 Conguration
 IP address has been changed or admin password
has been forgotten –
To reset the IP address to the default IP address
“192.168.1.1” or reset the login password to default value,
press the hardware reset button on the front panel for
about 15 seconds. After the device is rebooted, you can log
in the management Web interface within the same subnet of
192.168.1.xx.
Reset Button
Figure 5-1: ICG-2515-NR Series Reset Button
6. Customer Support
You can browse our online FAQ resource and User’s Manual on
PLANET Web site rst to check if it could solve your issue. If
you need more support information, please contact PLANET
support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq.php?method=keywo
rd&keyword=ICG-2515
Support team mail address:
[e-mail]
ICG-2515-NR and ICG-2515W-NR User’s Manual:
https://www.planet.com.tw/en/support/downloads?&method=ke
yword&keyword=ICG-2515&view=3#list
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.