ICG-2510W(G)-LTE Series User Manual

Table Of Contents
82
Object Packet
Filter
Description
Enable Packet
Filter
Enable or disable “packet filter” function
Policy
Two policies are provided. One is Discard packets conform to the
following rules and the other is Accept only the data packets conform to
the following rules.
Add Filter Rule
Direction
Input: packet from WAN to LAN
Output: packet from LAN to WAN
Protocol Packet protocol type
Source Ports Packet’s source port
Destination
Ports
Packet’s destination port
Source IP Packet’s source IP address
Destination IP Packet’s destination IP address
"Source Port”,” Destination Port" ,"Source IP" ,"Destination IP" could not be all empty.
4.3.7. NAT