ICG-2510W(G)-LTE Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. CELLULAR GATEWAY MANAGEMENT
- 4. WEB CONFIGURATION
- 5. APPENDIX A RJ45 Pin Assignments
79
Address
Website
Blocking by
Keyword
You can block access to certain website by the keywords contained in
their webpage
The steps of setting up Internet access policy
1. Select the policy number (1-10) in the drop-down menu.
2. For this policy to be enabled, click the radio button next to "Enable"
3. Enter a name in the Policy Name field.
4. Click the Edit List of PCs button.
5. On the list of PC screen, specify PCs by IP address or MAC address. Enter the appropriate IP addresses into the IP
fields. If you have a range of IP addresses to filter and complete the appropriate IP Range fields. Enter the appropriate
MAC addresses into the MAC fields.
6. Click the Apply button to save your changes. Click the Cancel button to cancel your unsaved changes. Click the
Close button to return to the Filters screen.
7. If you want to block the listed PCs from Internet access during the designated days and time, then keep the default