ICG-2510W(G)-LTE Series User Manual

71
Detection: This part contains configure information of connection detection
Object – IPSEC Description
Enable DPD
Detection
Enable or disable this function, tick means enable
Time Interval Set time interval of connect detection (DPD)
Timeout Set the timeout of connect detection
Action Set the action of connect detection
Advanced Settings: This part contains relevant setting of IKE, ESP, negotiation mode, etc.
Object – IPSEC Description
Enable
Advanced
Settings
Enable to configure 1st and 2nd phase information, otherwise it
will automatically negotiate according to opposite end
IKE Encryption IKE phased encryption mode
IKE Integrity IKE phased integrity solution
IKE Grouptype DH exchange algorithm
IKE Lifetime Set IKE lifetime, current unit is hour, the default is 0
ESP Encryption ESP encryption type
ESP Integrity ESP integrity solution