ICG-2510W(G)-LTE Series User Manual

Table Of Contents
70
Reconnect: This action will remove current tunnel, and re-launch tunnel
establish request
Enable: When the connection is enable, it will launch tunnel establish
request when the system reboot or reconnect, otherwise the connection
will not do it
Add To add a new IPSEC connection
Add IPSEC connection or edit IPSEC connection
Type: To choose IPSEC mode and relevant functions in this part, supports tunnel mode client, tunnel mode server and
transfer mode currently
Connection: This part contains basic address information of the tunnel
Object – IPSEC Description
NAME To indicate this connection name, must be unique
Enabled
If enabled, the connection will send tunnel connection request when it is
reboot or re-connection, otherwise it is no need if disable
Local WAN
Interface
Local addresses of the tunnel
Peer WAN
address
IP/domain name of end opposite; this option can not fill in if using tunnel
mode server
Local Subnet
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this
option cannot fill in if transfer mod is used.
Remote Subnet
IPSec opposite end protects subnet and subnet mask,
i.e.192.168.7.0/24; this option cannot fill in if transfer mode is used.
Local ID Tunnel local end identification, IP and domain name are available
Remote ID Tunnel opposite end identification, IP and domain name are available