ICG-2510W(G)-LTE Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. CELLULAR GATEWAY MANAGEMENT
- 4. WEB CONFIGURATION
- 5. APPENDIX A RJ45 Pin Assignments
7
1. INTRODUCTION
Thank you for purchasing PLANET Industrial 4G LTE Cellular Wireless Gateway. Please refer to the table list below for
the models used in Europe and the U.S.:
Model Name
4G LTE
GPS
FDD TDD
ICG-2510W-LTE-EU
B1/B3/B5/B7/B8/B20 B38/B40/B41
-
ICG-2510WG-LTE-EU
█
ICG-2510W-LTE-US
B2/B4/B12
-
ICG-2510WG-LTE-US
█
“Cellular Gateway” is used as an alternative name in this user’s manual.
1.1. Packet Contents
Open the box of the Cellular Gateway and carefully unpack it. The box should contain the following items:
1. Industrial 4G LTE Cellular Wireless Gateway x 1
2. Quick installation guide x 1
3. I/O connector x 2
4. Power connector x 1
5. Ethernet cable x 1
6. Console cable x 1
7. 4G LTE antenna x 2
8. Wi-Fi antenna x 1
9. GPS antenna x 1 (for ICG-2510WG-LTE)
10. DIN-rail kit x 1
11. Side panel with two screws x 1
12. Antenna dust cap x 4 (ICG-2510W-LTE x 3)
If any item is found missing or damaged, please contact your local reseller for replacement.