ICG-2510W(G)-LTE Series User Manual

Table Of Contents
54
Object
Wireless
Security-WEP
Description
Authentication
Type
Open or shared key
Default Transmit
Key
Select the key from Key 1 to Key 4.
Encryption
There are two levels of WEP encryption, 64-bit (40-bit) and 128-bit. To
utilize WEP, select the desired encryption bit, and enter a passphrase or
WEP key in hexadecimal format. If you are using 64-bit (40-bit), then
each key must consist of exactly 10 hexadecimal characters or 5 ASCII
characters. For 128-bit, each key must consist of exactly 26
hexadecimal characters. Valid hexadecimal characters are "0"-"9" and
"A"-"F"
ASCII/HEX
ASCII, the keys is 5 bit ASCII characters/13bit ASCII characters
HEX, the keys is 10bit/26 bit hex digits
Passphrase The letters and numbers used to generate a key
Key1-Key4 Manually fill out or generated according to input on the pass phrase